High-temperature wear-resistant material fireproof plate quality wardrobe starting from the selection

High-temperature wear-resistant material of the fire-resistant sheet, it is currently the most used door material, fire board is a layer of kraft paper impregnated with phenol resin and a layer of melamine impregnated decorative paper pressed under high temperature and pressure, Abbreviated HPL, thickness is 0.2-1.6mm. The fire door panel is fire-resistant or cold-pressed on the medium density board or the creased board substrate. The fireproof board has bright color, good surface glossiness, certain wear resistance, heat resistance, combustion resistance, and resistance. Contamination. The fire-resistant panel door panel is superior to the double veneer panel in terms of wear resistance, high temperature resistance, and scratch resistance. Let's take a look at how the fire-resistant sheets of high-temperature wear-resistant materials are.

The advantages and disadvantages of fire door panels

Advantages: wear resistance, high temperature resistance, scratch resistance, resistance to penetration, easy to clean and bright color characteristics, in line with the requirements of the use of kitchen cabinets, adapt to the special environment of the kitchen, but also cater to the development trend of combining "beautiful and practical" kitchen cabinets.

Disadvantages: The door panel is flat, can not create three-dimensional effects such as bumps, metal, fashion sense is slightly poor, more suitable for the general appearance of the cabinet, pay attention to practical features of the low-end decoration.

The fire board door base material is particle board, moisture proof board or density board, and the surface is decorated with fireproof board veneer. The price of domestic fire door panels is relatively low, and the cost of Korean plate and German board will increase by about 25% and 50%.

The fire board is in line with the development trend of the combination of “beautiful and practical” wardrobe, so it is prosperous in the market. The disadvantage is that the door panel is a flat panel and cannot create three-dimensional effects such as bumps and metal, and the fashion sense is somewhat poor.

Fire board is made of silicon or calcium material as the main raw material, and a certain proportion of fiber materials, lightweight aggregates, adhesives and chemical additives mixed by autoclave technology made of decorative plates.

The above mentioned fire-resistant sheets for high-temperature wear-resistant materials are briefly introduced here, and we hope to help you. For more information, please visit this website. Stay tuned.

Plate plate wardrobe

Mono Calcium Phosphate ,the chemical formula is  Ca (H2PO4)2.H2O, molecular weight of the body is 252.06, after dryed the product is white or slightly yellow micro powder or granules, the relative density of 2.22 (16 Â°C). Slightly hygroscopic, soluble in hydrochloric acid, nitric acid, slightly soluble in cold water, almost insoluble in ethanol. At 30 Â°C, 100 ml of water soluble MCP 1.8g. The aqueous solution was acidic, heating the aqueous solution can get calcium hydrogen phosphate. Lose crystal water at 109 Â°C and decomposed into calcium metaphosphate at 203°C. Applications:Monocalcium Phosphate is used to supply mineral nutrition such as phosphorus (P) and calcium (Ca) for animal, which can be easily digested and absorbed. Extensively applied as additives of Phosphorous and Calcium in aquatic animals feed.Higher water solubility of MCP is required in aquatic animals feed.

Monocalcium Phosphate (MCP)

Monocalcium Phosphate,Mcp Feed Grade,Monocalcium Phosphate Powder,Monocalcium Phosphate Granular

MIDI FEED BIOTECH LIMITED , https://www.chinabromine.com